A non-toxic fixative specially formulated for bonding sealing rope (fibreglass or ceramic) onto solid fuel stoves or cookers. Easy to apply and just as easy to remove when rope needs replacing. Contains no solvents so it can be safely used in confined spaces.

Availible in 30ml (With Brush) & 125ml (Bottle).  Comes with instructions

Flue Free is a specially formulated granular deposit conditioner which breaks down creosote and tar deposits that coat combustion areas and chimney interiors - a problem experienced with most solid fuel stoves and fires. Flue Free helps to maintain clean chimneys for maximum efficiency, lower fuel consumption and reduces the risk of chimney fires. Suitable for use wiith stainless steel flues.

Available in 750g. Comes with instructions.

A very effective polish for use on copper, brass, nickel, pewter, chromium, silver and gold. Multi-Use Metal Polish gives a cleaner, more protective, longer lasting shine. It's brilliant!

Availible in 150ml. Comes with instructions.

Brick and Stone Sealer is a solvent base combination of resins, oils and special compounds formulated for sealing and protecting natural brick and stone on fire place surrounds. The sealer allows brick and stone to breathe. It will make the surface strongly repellent to oil, water, dirt and dust. Food and drink spillage can be easily removed as they remain on the surface and are not absorbed. Brick and Stone Sealer will enhance the natural beauty of brick and stone. Depending on the nature of the brick or stone it can slightly deepen the colour. It is recommended that a small unobtrusive area is tested for suitability prior to complete application.

Availible in 500ml. Comes with instructions.

The really effective answer in removing smoke, soot and tar stains caused by wood, coal and gas fires from brick, stone, concrete, marble and other hard surfaces. It does not normally remove discolouration caused by weathering or natural impurities. Do not use on any decorated or painted slate or stone. Fireplace Cleaner eliminates the need for harsh damaging acids. Brisk brushing creates a foam which cleans smoke stains right down to the pores, without damage. We recommend Brick & Stone sealer once the fireplace has been cleaned to protect from future staining.

Availible in 500ml bottle. Comes with instructions

Glass Cleaner cleans where household window cleaners fail. It clings to vertical surfaces to quickly dissolve smoke stains and tar/creosote deposits. It is recommended to clean regularly to avoid excessive stain build up Use on wood, coal or oil burning stoves, glass firescreens or fronts. On woodburning stoves use regularly to avoid substantial accumulations of tar/creosote deposits on glass doors. Glass Cleaner can be used on glass oven doors to remove grease. It will not damage painted or enameled surrounds.

Availible in 320ml. Comes with Instructions.

A matt black water based polish suitable for wood/coal stoves, grates and surrounds. It is particularly useful for covering rust spots and paint chips. After drying, it can be polished to a rich dull black. Stove and Grate Polish will not smear or rub off on hands when dry. Apply sparingly.

Either black or graphite

Availible in 170g. Comes with Instructions

]]> sales@heritage-supplies.com (PHILIP BRAITHWAITE) http://www.heritage-supplies.com/fire-stove-accessories/stove-fireplace-care/black-graphite-stove-grate-polish-tin Wed, 14 Apr 2010 15:46:03 +0100 6.99 GBP 3992 0.1 96 HS/201100 http://www.heritage-supplies.com/images/large/multi%20use%20metal%20polish_LRG.jpg http://www.heritage-supplies.com/fire-stove-accessories/stove-fireplace-care/black-stove-grate-polish-tube http://www.heritage-supplies.com/fire-stove-accessories/stove-fireplace-care/black-stove-grate-polish-tube/reviews

Hotspot black grate polish is a water based polish that covers minor scratches and rust. Leaving a lustrous black finish that does not rub off when dry. Microscopic colour pigments in the polish bond with the stove surface to hide minor blemishes and improve appearance. Suitable for grates, stoves and other cast iron items.

Availible in 75ml tube. Comes with instructions.

Grate Paint is a high temperature, corrosion resistant, one coat decorative finish specially formulated for use on cast iron and steel. Most substrates including steel and its alloys can be coated successfully however, we recommend that each new substrate should be checked individually for its suitability. Optimum corrosion and abrasion resistance may be achieved by oven curing although curing will take place during operation of the product or components. A thin coating allows excellent heat transmission and is colour fast up to 350°C, when allowed to cure for 24 hours.

Availible in 300ml. Comes with instructions.

Grate Paint is a high temperature, corrosion resistant, one coat decorative finish specially formulated for use on cast iron and steel. Most substrates including steel and its alloys can be coated successfully however, we recommend that each new substrate should be checked individually for its suitability. Optimum corrosion and abrasion resistance may be achieved by oven curing although curing will take place during operation of the product or components. A thin coating allows excellent heat transmission and is colour fast up to 350°C, when allowed to cure for 24 hours.

Availible in 450ml. Comes with instructions.

Stove Paint is an ultra-high temperature corrosion resistant one coat finish specially formulated for use on wood or multi-fuel stoves, gas coal/log effect fires, grates, baskets, fire backs, barbecues, pipes, flues etc. Extra coverage over conventional systems results from the high solids content. Curing will take place during operation of the product or components. A thin coating allows excellent heat transmission and is colour fast up to 650°C, when allowed to cure for 24 hours.

Availible in 150ml, 250ml & 450ml. Comes with instructions.

]]> sales@heritage-supplies.com (PHILIP BRAITHWAITE) http://www.heritage-supplies.com/fire-stove-accessories/stove-fireplace-care/matt-stove-paint-aerosol Wed, 14 Apr 2010 15:44:18 +0100 5.85 GBP 3988 0.1 96 HS/200911/21/41 http://www.heritage-supplies.com/images/large/matt%20stove%20paint%20-%20aerosol_LRG.jpg http://www.heritage-supplies.com/fire-stove-accessories/stove-fireplace-care/silk-grate-paint-tin http://www.heritage-supplies.com/fire-stove-accessories/stove-fireplace-care/silk-grate-paint-tin/reviews

Grate Paint is a high temperature, corrosion resistant, one coat decorative finish specially formulated for use on cast iron and steel. Curing will take place during operation of the product or components. A thin coating allows excellent heat transmission and is colour fast up to 350°C, when allowed to cure for 24 hours.

Availible in 100ml. Comes with instructions.

Stove Paint is an ultra-high temperature corrosion resistant one coat finish specially formulated for use on wood or multi-fuel stoves, gas coal/log effect fires, grates, baskets, fire backs, barbecues, pipes, flues etc. Extra coverage over conventional systems results from the high solids content. Curing will take place during operation of the product or components.

A thin coating allows excellent heat transmission and is colour fast up to 650°C,when allowed to cure for 24 hours.

Availible in 100ml tin & 200ml tin. Comes with instructions.

Hotspot slate oil seals and protects tired looking slate, enhancing its natural beauty. It may slightly deepen the natural colour. The sealer repels dirt & water whilst allowing slate to breathe.

Availible in 100ml bottle. Comes with instructions.

Hotspot Marble Polish produces crystallisation action between polish and marble which is accelerated by buffing and temperature. It is not an abrasive but modifies the chemical nature of the marble itself to produce a rich long lasting sheen. Although the liquid can be successfully hand polished, we recommend the use of a low speed drill with lambswool polish attachment.

Availible in 200ml bottle. Comes with instructions.

Hotspot glass fibre woven lagging rope for fitting between surrounds, firebacks and where any gap needs to be filled with a flexible expansion material that has insulation qualities. Use with Heatbond Stove Rope Fixative

Length 1.5m

12mm only. Comes with instructions

Hotspot glass fibre woven stove rope is suitable for most solid fuel stoves & boilers.

 Use with Heatbond Stove Rope Fixative.

Length 1.5m

Availible in 6mm, 9mm, & 12mm. Comes with instructions

A pliable adhesive black fire cement of putty-like consistency available in 500g and 1kg containers. Is water based and non-toxic, and withstands heat up to 1400°C (2550°F) This product is specially formulated and recommended by leading industrial and domestic heating appliance manufacturers throughout the world. Ideal for patching and repairing firebacks and brickwork as well as for gas tight assembly, installation and maintenance of boilers, fires, flues, stoves, heating installations, ranges etc.

Availible in 500gm & 1 kg. Comes with instructions.